• Power Electronics And Renewable Energy Research Laboratory (PEARL) - V2
  • marizan@um.edu.my
logo
logo

Title: Development of Wireless Opportunity Charging for Last Mile Autonomous Delivery Vehicle and Its Battery Management System

- Prototype Deployment


ABSTRACT

This project develops a static wireless opportunity charging system for autonomous last-mile vehicles and robotic cleaning platforms. The wireless power transfer (WPT) architecture consists of a primary transmitter and a secondary receiver coupled through a high-frequency magnetic coil pair. A front-end inverter and primary compensation network convert input power to high-frequency AC for contactless energy transfer. On the receiver side, the induced AC is rectified and regulated by a DC–DC charging stage to provide controlled power to the battery. The prototype was designed around a nominal 85 kHz operating frequency in accordance with the SAE J2954 recommended practice, with a target charging power of 1 kW, a nominal battery voltage of 24 V, and tolerance to at least 20% coil misalignment.

Experimental results showed output power exceeding 1 kW with a peak efficiency of approximately 96% at a 9 cm air gap. Efficiency remained approximately 94.8% when the gap was increased to 12 cm. During charging, the controller maintained a 24 V constant-voltage (CV) output through current regulation stages of 15 A, 7.5 A, and 5 A. The system also demonstrated stable operation with coil misalignment exceeding 20%, supporting the feasibility of cable-free opportunity charging for autonomous mobile equipment.

RESULT

•The proposed system delivers an output power exceeding 1 kW, achieving a peak efficiency of approximately 96% at a 9 cm air gap, which degrades marginally to 94.8% at an extended 12 cm air gap.

•Throughout the charging profile, the charger maintains a constant voltage (CV) mode regulated at 24 V, transitioning seamlessly through discrete current regulation stages of 15 A, 7.5 A, and 5 A.

•Furthermore, the system exhibits exceptional robustness against spatial variations, sustaining stable operation under coil misalignments exceeding 20% while operating at the 85 kHz nominal frequency mandated by the SAE J2954 standard.


Last Update: 02/11/2026