Title: Market Validation of Dynamic Wireless Charging for Personal E-Mobility
- Prototype Deployment
ABSTRACT
This project investigates and validates a dynamic wireless power transfer (DWPT) system for personal e-mobility applications under real environmental conditions. The proposed arrangement employs four transmitter coil sets driven by a single high-frequency inverter. The shared inverter provides the excitation needed by the transmitters, while one receiver collects the transferred power as it moves across the transmitting sections. The received AC power is rectified and delivered to the battery charger. The experimental system includes transmitter and receiver compensation networks, power-conversion hardware, a rectifier, a charging stage, and a battery load. Its nominal operating frequency is 85 kHz, following the SAE J2954 recommended practice.
Experimental tests reported 696 W of transferred power at 81.5% efficiency with a 10 cm air gap, and 668 W at 75% efficiency with an 18 cm air gap. The charging system maintained a constant-voltage (CV) output of 48 V and used current regulation stages of 17 A, 10 A, and 5.5 A. The prototype also demonstrated operation under coil misalignment exceeding 20%. These results support the practical feasibility of a shared-inverter, multi-transmitter architecture for dynamic wireless charging of personal electric mobility devices.
RESULT
•Experimental results indicate the system delivers 696 W at 81.5% efficiency with a 10 cm air gap, and 668 W at 75% efficiency at an 18 cm air gap.
•Throughout the charging profile, the charger maintains a constant voltage (CV) mode regulated at 48 V, transitioning seamlessly through discrete current regulation stages of 17 A, 10 A, and 5.5 A.
•Furthermore, the system exhibits exceptional robustness against spatial variations, sustaining stable operation under coil misalignments exceeding 20% while operating at the 85 kHz nominal frequency mandated by the SAE J2954 standard.
Last Update: 02/11/2026